Time Shift - Philips 65PUT7906 User Manual

List of Recordings
You can view and manage your recordings in the list
of recordings.
To open the list or recordings...
1 - Press MENU > Navigation keys down >
Record > Record list and press OK.
2 - With a recording selected in the list, you can use
the colour keys to remove the recording or show the
recording information.
3 - Press Back to close the menu.
Watch a Recording
To watch a recording...
1 - Press MENU > Navigation keys down >
Record > Record list and press OK.
2 - In the list of recordings, press OK to play the
recording.
3 - You can use the Playback keys for pause, play,
rewind, fast forward, or stop.
4 - To switch back to watch TV, press EXIT.
16.3

Time Shift

What You Need
You can pause a digital TV broadcast and resume
watching it a bit later.
To pause a TV programme you need...
• a connected USB storage device formatted to FAT32
• digital TV channels installed on this TV
A storage device need to be assigned as the Time
shift data storage before you can start the Time shift.
To assign a storage device for Time shift...
1 - Press MENU while watching TV, then
press Navigation keys down to Record > Device info.
2 - Select the device you want to assign and press
OK.
3 - Select Set timeshift to assign the device for Time
shift data storage. The device will be marked with
TSHIFT on Device info list.
With the USB storage device connected and
formatted, the TV continuously stores the TV
broadcast you are watching. When you switch to
another channel, the broadcast of the former channel
is cleared. Also when you switch the TV to standby
the broadcast is cleared.
You cannot use Time shift function when you are
recording.
Pause a Programme
To pause and resume a broadcast...
• To pause a broadcast, press Pause. A progress bar
at the bottom of the screen appears briefly.
• To call up the progress bar, press Pause again.
• To resume watching, press Play.
With the progress bar on screen, press Rewind or
press Forward to select from where you want to
start viewing the paused broadcast. Press these keys
repeatedly to change speed.
You can pause a broadcast for a maximum time span
of 90 minutes.
To switch back to the live TV broadcast, press Stop.
Replay
Since the TV stores the broadcast you are watching,
you can mostly replay the broadcast for a few
seconds.
To replay a current broadcast...
1 - Press Pause
2 - Press Rewind. You can press it repeatedly to
select from where you want to start viewing the
paused broadcast. Press these keys repeatedly to
change speed. At one point you will reach the start of
the broadcast storage or the maximum time span.
3 - Press Play to watch the broadcast again.
4 - Press Stop to watch the broadcast live.
40