Operation; 4-Channel Wiring; Remote Punch Bass - Rockford Fosgate Punch P4004 Installation And Operation Manual

4-Channel Wiring

•
2/4 CHN. SWITCH out to set to 4 CHN.
•
- is set independently to Gain (Front & Rear)
suit application.
•
Rear) - is set
Crossover (Front &
independently to suit
application.
Stereo Bridged
O
PERATION

REMOTE PUNCH BASS

Mounting and installation
1. Find a location that gives easy access to the remote.
NOTE:You can mount this unit in a variety of ways. Remove the back housing by using a small flat
screwdriver in the slotted hole at the back.The housing can be installed with the mounting tab up
or down, or left off for in panel installation.
2. Route the cable for the remote and connect to the amplifier.
I
NSTALLATION
9