Hama USB 2.0 Hub - Operating Instructions

Table of Contents

Package Contents

The product is intended for private, non-commercial use only.
Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Do not open the device or continue to operate it if it becomes damaged.
Do not operate the product outside the power limits given in the specifications.
Do not modify the product in any way. Doing so voids the warranty.
Keep this product, as all electrical products, out of the reach of children!

Ensure that the total power consumption of all connected terminal devices does not exceed 1200 mA.
Bus-powered operation (without power supply unit) USB 2.0 Ž max. 500 mA / USB 3.0 Ž max. 900 mA / USB-C Ž 3000 mA
Consult the operating instructions or the technical speci cations of the connected devices and your computer.
It is essential that you observe these speci cations and the safety instructions regarding the power supply of your devices.

Switch on your computer and boot the system.
First connect the enclosed power supply unit to a socket and then to the hub.
Connect the product to a free USB port on your computer.
You do not have to install drivers; the computer will automatically recognise the product.
If necessary, follow the instructions for your operating system.
In order to use your USB devices or storage devices, plug them into the product one after the other.

Please contact Hama Product Consulting if you have any questions about this product.

Hotline: +49 9091 502-115 (German/English) Further support information can be found here:
www.hama.com

Compatibility	USB-A-port
System requirements	Windows 10 / 8 / 7 Mac OS 10.8 ≥
USB specification	USB 2.0
Specifications in accordance with Regulation (EU) 2019/1782
Manufacturer's name or trade mark, commercial registration number and address	Hama, HRA12159, Dresdner Str. 9 86653 Monheim
Model identifier	DYS605-050120W-3
Input voltage	100-240 V
Input AC frequency	50/60 Hz
Output voltage/ Output current/ Output power	5.0 V DC/1.2 A/6.0 W
Average active effiency	76.2%
Effiency at low load (10%)	70.7%
No-load power consumption	0.06 W