Audio Quality; Wired Headsets; Wireless Headsets; Connect A Headset To Your Phone - Cisco 8851NR User Manual

CISCO 8800 SERIES
• End a call
• Change the headset volume for a call
• Redial a number
• View Caller ID
• Reject a call
• Divert a call
• Place a call on hold by answering an incoming call
• End a call by answering an incoming call
For more information, see the documentation from your Bluetooth headset manufacturer.
Related Topics
Configure a Headset on the

Audio Quality

Beyond physical, mechanical, and technical performance, the audio portion of a headset must sound good to
the user and to the party on the far end. Sound quality is subjective, and we cannot guarantee the performance
of any headsets. However, various headsets from leading headset manufacturers are reported to perform well
with Cisco IP Phones.
For additional information, see
accessories.html

Wired Headsets

A wired headset works with all Cisco IP Phone features, including the Volume and Mute buttons. These
buttons adjust the earpiece volume and mute the audio from the headset microphone.
When you install a wired headset, make sure you press the cable into the channel in the phone.
Caution
Failure to press the cable into the channel in the phone can lead to cable damage.

Wireless Headsets

You can use most wireless headsets with your phone. For a list of supported wireless headsets, see
http://www.cisco.com/c/en/us/products/unified-communications/uc_endpoints_accessories.html
Refer to your wireless headset documentation for information about connecting the headset and using the
features.

Connect a Headset to Your Phone

Each type of wired headset, adapter, or base connects to a phone using a different port and a different type of
connector and cable. Common types include an RJ connector, a USB connector, and a Y-cable.
GoMomentum.com
Phone, on page 108
https://www.cisco.com/c/en/us/products/unified-communications/uc_endpoints_
105
USER GUIDE
888.538.3690