Table of Contents
Advertisement
Troubleshooting
Problem
I am only able to fit
10 to 15 songs on a
CD-R or CD-RW for
my RioVolt.
After creating a CD
using DirectCD the
RioVolt will not read it
properly.
I am unable to power
up the RioVolt. This
happens when using
new batteries or an
AC power adapter
(not included).
The RioVolt is
working with
batteries, but when I
plug in an AC adapter
(not included) it does
not work.
Solution
If you are only able to fit 10 to 15 songs on a CD-R or CD-RW for use in your
RioVolt, then it is likely you are creating the CD in audio or .wav format instead of
data format. You should be able to fit hundreds of tracks onto one CD using MP3
files. Consult the documentation that came with your burning software for further
assistance on
"ripping and
If the RioVolt is having trouble reading a CD created using DirectCD, make sure
that the CD is formatted with compression OFF. If compression is ON, the RioVolt
will not read the tracks properly. For further assistance, please refer to the
documentation that came with your burning software.
Be sure that the LOCK/UNLOCK switch on the RioVolt is set to UNLOCK. The
player will not power up if the LOCK/UNLOCK switch is in the LOCK position. Put
the LOCK/UNLOCK switch in the UNLOCK position and press PLAY/PAUSE to
power up the RioVolt.
Be sure that the AC Adapter is plugged into the
plugging the AC Adapter into the Line-Out connector on the RioVolt. If you are
still experiencing problems, be sure the LOCK/UNLOCK switch on RioVolt is set to
UNLOCK.
burning" digital audio in MP3 format.
proper
Troubleshooting
Contents
Index
16
connection. You may be
Advertisement
Table of Contents
