Cameras Settings; Cameras Camera [N] Backlight Defaultmode; Cameras Camera [N] Brightness Defaultlevel; Cameras Camera [N] Brightness Mode - Cisco Webex Room Panorama Administrator's Manual

Cisco Webex Room Panorama and Room 70 Panorama

Introduction

Cameras settings

Cameras Camera [n] Backlight DefaultMode

n: 1..7
This configuration turns backlight compensation on or off. Backlight compensation is
useful when there is much light behind the persons in the room. Without compensation the
persons will easily appear very dark to the far end.
Not applicable for the integrated camera, because it automatically adjusts itself based on
the room lighting conditions.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
Value space: Off/On
Off: Turn off the camera backlight compensation.
On: Turn on the camera backlight compensation.

Cameras Camera [n] Brightness Mode

n: 1..7
Define the camera brightness mode.
Not applicable for the integrated camera, because it automatically adjusts itself based on
the room lighting conditions.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
Value space: Auto/Manual
Auto: The camera brightness is automatically set by the device.
Manual: Enable manual control of the camera brightness. The brightness level is set
using the Cameras Camera [n] Brightness DefaultLevel setting.
D15439.02 Room Panorama and Room 70 Panorama Administrator Guide CE9.14, OCTOBER 2020.
Configuration Peripherals Maintenance

Cameras Camera [n] Brightness DefaultLevel

n: 1..7
Define the brightness level. Requires the Cameras Camera [n] Brightness Mode to be set to
Manual.
Not applicable for the integrated camera, because it automatically adjusts itself based on
the room lighting conditions.
Requires user role: ADMIN, INTEGRATOR
Default value: 20
Value space: Integer (1..31)
The brightness level.

Cameras Camera [n] Flip

n: 1..7
With Flip mode (vertical flip) you can flip the image upside down. Flipping applies both to
the self-view and the video that is transmitted to the far end.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
Auto: If the camera detects that it is mounted upside down, the image is automatically
flipped. If the camera cannot auto-detect whether it is mounted upside down or not, the
image is not changed.
Off: Display the image on screen the normal way.
On: Display the image flipped upside down. This setting is used when a camera is
mounted upside down, but cannot automatically detect which way it is mounted.
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
98
Administrator Guide
Device settings Device settings Appendices