b. Press and hold the
c.
[3][1]
[1] [0]
d.
[1][2]
123.0
e. Enter RX frequency (Ex. 43255000)
f.
[3][0]
[1][0]
-->>
g. Enter TX frequency (Ex. 43755000)
h.
[3][0]
[1][0]
-->>
i. Press and hold the
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 10:
RX = 432.6625 MHz
TX CTCSS tone 123.0
a. Press the
key to switch between menus.
b. Press and hold the
c.
[3][1]
[1] [0]
d.
[1][2]
123.0
-->>Use
to select Upper display
e. Enter RX frequency (Ex. 43266250)
f.
[3][0]
[1][0]
-->>
g. Press and hold the
6.4 Repeaters Programming
The following instructions assume that you know what transmit and receive frequencies your repeater employs, and that
you're authorized to use it.
key to set the radio to VFO mode, and the VFO icon is displayed on the right.
Deletes Prior Data in channel (Ex. 10)
Selects desired TX encode tone
Enter the desired channel (Ex 10)
RX has been added
Enter the same channel (Ex 10)
TX has been added
key to return to the MR mode and the channel number will reappear.
key to set the radio to VFO mode, and the VFO icon is displayed on the right.
Deletes Prior Data in channel (Ex. 10)
Select desired TX encode tone (Ex 123 CTCSS)
Enter the desired channel (Ex 10)
Channel has been added
key to return to the MR mode and the channel number will reappear.
23