Advertisement
Silicon RAID Introduction
Creating and Deleting RAID sets with BIOS Utility
Creating and deleting RAID sets must be performed in the BIOS for operating systems
other than W indows 2000 and XP.For 2000 and XP, RAID sets can be created and
managed by either the BIOS utility or the SATARAID GUI.
Be sure to enable the Silicon RAID Controller in Onboard Devices Configura-
tion of Integrated Peripherals in BIOS before configuring the silicon BIOS. After
that press F10 to save the configuration and exit. During boot up, a screen similar to
that below will appear for about 5 seconds. Press CTRL+S or the F4 key to enter the
BIOS RAID utility.
The RAID Utility menu screen will be displayed. A brief description of each section
is presented on the next page.
M ain M enu
The Main Menu in the upper left corner is used to choose the operation to be
performed. The selections are:
Create RAID set
Delete RAID set
Rebuild RAID 1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
7 - 3
Advertisement
