Volvo S60 Owner's Manual page 146

DISPLAYS AND VOICE CONTROL
||
response is still not given, voice control will be
automatically canceled.
To speed up communication and skip prompts
from the system, press the voice control but-
ton on the steering wheel keypad. This
will interrupt the system's response and you
can say the next command.
Voice command examples
Tap .
1.
2. Say "
Call [First name] [Last name]
[number category] ", e.g. "
Smith cellular ".
> The system will call the selected con-
tact from the phone book. If the contact
has several phone numbers (e.g. home,
cell, work), the right category must also
be given.
Commands/phrases
The following commands can usually be used
in any situation:
" Repeat " - repeats the most recent voice
•
command in the current dialog.
" Cancel " - cancels the dialog.
•
Help
" " - initiates a help dialog. The sys-
•
tem responds with commands that can be
used in the current situation, an instruc-
tion or an example.
20
Note that this only cancels the dialog when the system is not speaking. To do this, press and hold
144
Commands for specific functions, such as
phone and audio, are described in the sections
related to that function.
Numbers
Number commands can be given in different
ways depending on the function to be con-
trolled:
Phone numbers and zip codes should be
•
given by stating each number individually,
e.g. "zero, three, one, two, two, four, four,
three" (03122443).
Call Robyn
Addresses can be given by stating each
•
number individually or in a group, e.g.
"two, two" or "twenty-two" (22). For Eng-
lish and Dutch language settings, groups
of numbers can also be said in sequence,
e.g. "twenty-two, twenty-two" (22 22).
For English, double or triple digits can also
be used, e.g. "double zero" (00). Numbers
in the range 0-2300 can be used.
Frequencies can be given as "ninety-eight
•
point eight" (98.8), "one hundred four
point two" or "hundred and four point
two" (104.2).
20 Speech rate and repeat mode
The speed at which the system speaks can be
adjusted.
With repeat mode on, the system will repeat
what you have said.
To change the speech rate or activate/deacti-
vate repeat mode:
1. Tap
2. Tap
settings.
Repeat Voice Command
•
Speech Rate
•
Related information
Voice Control (p. 142)
•
Voice control for cellular phones (p. 145)
•
Voice control for radio and media (p. 145)
•
Climate control system voice commands
•
(p. 198)
Voice control settings (p. 146)
•
until you hear two beeps.
Settings in the Top view.
System Voice Control and select