Safety Precautions - Traxxas LaTrax Prerunner Owner's Manual

Technical support is available Monday through Friday
from 8:30am to 9:00pm central time. Technical assistance
is also available at LaTrax.com. You may also e-mail
customer support with your question at support@LaTrax.
com. Join thousands of registered members in our online
community at LaTrax.com.
LaTrax offers a full-service, on-site repair facility to handle
any of your service needs. Maintenance and replacement
parts may be purchased directly from LaTrax by phone
or online at LaTrax.com. You can save time, along with
shipping and handling costs, by purchasing replacement
parts from your local dealer.
Do not hesitate to contact us with any of your product
support needs. We want you to be thoroughly satisfied
with your new model!

SAFETY PRECAUTIONS

We want you to safely enjoy your new model. Operate
your model sensibly and with care, and it will be exciting,
safe, and fun for you and those around you. Failure to
operate your model in a safe and responsible manner
may result in property damage and serious injury. The
precautions outlined in this manual should be strictly
followed to help ensure safe operation. You alone must
see that the instructions are followed and the precautions
are adhered to.
All instructions and precautions outlined in
this manual should be strictly followed to
ensure safe operation of your model. This model is
not intended for use by children under 14 years of
age without the supervision of a responsible and
knowledgeable adult.
Important Points to Remember
• Your model is not intended for use on public roads or
congested areas where its operation can conflict with or
disrupt pedestrian or vehicular traffic.
• Never, under any circumstances, operate the model in
crowds of people. Your model is fast and could cause
injury if allowed to collide with anyone.
• Because your model is controlled by radio, it is subject
to radio interference from many sources that are
beyond your control. Since radio interference can cause
momentary losses of radio control, always allow a safety
FCC Compliance
This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential settings. This product generates, uses, and can radiate
radio frequency energy, and, if not operated in accordance with the instructions, may cause harmful interference to radio communications. The user is cautioned that changes or
modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Canada, Industry Canada (IC)
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the
following two conditions: This device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Statement
This equipment complies with radio frequency exposure limits set forth by FCC and Industry Canada for an uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body or bystanders and must not be co-located or operating in conjunction with any other antenna or transmitter.
TQ Radio System
Operation Frequency: 2406~2453 MHz
Maximum Radio Frequency Power: Maximum Peak Power -1 dBm
margin in all directions around the model in order to
prevent collisions.
• The motor and battery can become hot during use.
Be careful to avoid getting burned.
• Don't operate your model at night, or anytime your line
of sight to the model may be obstructed or impaired in
any way.
• Most importantly, use good common sense at all times.
Speed Control
• Disconnect the Battery: Always disconnect the battery
from the model when not in use.
• Transmitter on First: Switch on your transmitter first
before switching on the speed control to prevent
runaways and erratic performance.
• Don't Get Burned: The motor can become extremely
hot during use, so be careful not to touch it until it is
cool. Make sure there is adequate airflow to the motor.
• Use the Factory-Installed Connectors: Do not change
the battery connector. Improper wiring can cause fire or
damage to the ESC. Please note that modified speed
controls can be subject to a rewiring fee when returned
for service.
• Insulate the Wires: Always insulate exposed or damaged
wiring with heat shrink tubing to prevent short circuits.
• No Reverse Voltage: The speed control is not protected
against reverse polarity voltage. When changing the
battery, be sure to install the same type of connectors
to avoid reverse polarity damage to the speed control.
Removing the battery connectors on the speed control
or using the same-gender connectors on the speed
control will void the product's warranty.
• No Schottky Diodes: External Schottky diodes are
not compatible with reversing speed controls. Using a
Schottky diode will damage the ESC and void the 30-
day warranty.
Recycling Your NiMH Battery
It is strongly recommended that you recycle the vehicle
battery when it has reached the end of its useful life.
not throw your battery in the trash.
center near you, ask your local hobby dealer or visit
www.call2recycle.org.
Traxxas iD Battery Connector
Operation Frequency: 13.56 MHz
Maximum Radio Frequency Power: Maximum Peak Power -29.27 dBuA/m @ 10m
INTRODUCTION
Do
To find a recycling
3