Setting The Date And Time - Ricoh RDC-6000 Getting Started

Setting the Date and Time

The date and time are recorded when you shoot a picture. You will need to adjust
these settings when you first use the camera and each time you change time zones on
trips.
• Use the yyyy/mm/dd format to set the date.
Note
• Time is displayed in the 24-hour clock format. Midnight is expressed as
00:00 and noon as 12:00.
• Setting is possible from [ 2000/01/01 00:00 ] to [ 2099/12/31 ].
q Slide the power switch to turn on the
camera. And set the mode dial to [SET].
The set menu is displayed.
• To cancel the operation, turn the
Note
mode dial to another mode.
"Turning On the Camera" (P.41)
See
w Press the ▼ or ▲ button to select [DATE
SETTING] and press the ENTER
button.
The date/time setting menu is displayed.
e Press the MENU
the date display method.
r Press the ▼ and ▲ buttons to change
the numeral.
Pressing the up ▲ button increases the
numeral; pressing the down ▼ button
decreases the numeral. Keep pressing the
button changes the digit fast.
Select
button to select
MENU[SET UP]
FORMAT
DATE SETTING
KEEP SETTINGS
AUTO POWER OFF
AUTO LCD OFF
LANGUAGE
VIDEO OUT MODE
2000/01/01 16:35
Select
MENU
[DATE/TIME]
2000 / 01 / 01
00 : 00
Cancel
1
1/2
OK
33