Motorola CLP Series User Manual page 37

If...
Battery does not charge although it has
been placed in the drop-in charger for a
while
Unable to pair a Bluetooth headset
Unable to connect to a Bluetooth headset
Pairing with wrong Bluetooth headset
NOTE: When a feature in your radio does not correspond to the default or
preprogrammed values, ensure your radio is programmed using CPS with a customized
profile.
Chapter 7 : Troubleshooting
Then...
Perform one of the following actions:
• Verify the drop-in tray charger is prop-
erly connected and corresponds to a
compatible power supply. See
a Stand-Alone Battery with the Drop-in
Tray Charger on page
• Check the charger LEDs indicators to
see if the battery has a problem. See
Charger LED Indications on page
Ensure the target Bluetooth headset is not
connected to another device.
Ensure the target Bluetooth headset is not
connected to another device.
Do not perform pairing procedures next to
other Bluetooth headset devices.
CLP Bluetooth uses proximity pairing. En-
sure the headset is placed next to the CLP
radio.
68012000044-ED
Charging
23.
25.
37