Camera Specifications; Notes Before Installation - Sharper Image 208583 User Manual

CAMERA SPECIFICATIONS

Power Supply
Power Consumption
Standby Current
Battery Life
Battery Capacity
Image Quality
Viewing Angle
Night Vision Range
Wireless Connection
Anti-Flicker
Operating Temperature
Operating Humidity
LED INDICATOR LIGHT STATUS
Red light on continuously
Red light fast blinking
Green light fast blinking
Green light on continuously
Red light slow blinking
Yellow light on continuously
White light on continuously
White light off

NOTES BEFORE INSTALLATION

1. Keep this device out of reach of children and pets.
2. Make sure the camera has been fully charged (DC 5V/2A). We recommend charging the
camera indoors via type C and correct adapter at first. Once it is set up, you can plug the type
C charging cable directly into the solar panel for continuous hassle-free charging.
3. Working temperature -5F° to 120°F.
4. Working relative humidity 10% ~ 95%.
5. Do not expose the camera lens to direct sunlight.
6. The camera is rated IP65 waterproof for use in the rain or snow. However, do please not
submerge the camera in water.
PLEASE NOTE:
• This device will not connect to a 5G (5GHz) Wi-Fi frequency. You must have a 2.4GHz router or
a dual-band (2.4GHz + 5G) router and enable both bands. Consult your router instructions for
details.
• Strong lights may interfere with scanning the QR Code.
• Avoid placing this device behind furniture or near a microwave oven.
• Keep this device within your Wi-Fi network range.
DC 5V2A
2W (Max.)
<500uA
4-6 months
5200mAh
2 megapixel/1080P
130°
8m (Max)
2.4 GHz Wi-Fi IEEE 802.11 b/g/n
50HZ 60HZ
-5F° to 120°F
10% ~ 95% non-condensing
Booting up
Waiting for network setting
Network connecting
Network connected
Abnormal status
Firmware upgrading
Battery charging
Battery fully charged
- 4 -