Table of Contents
Advertisement
40
PROGRAMMING MODE - SETUP MODE
10-1. Pause function set up
Entering set up
mode.
You will see LqC1
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Display
.
Press the Start button.
Press 75°C (167°F) or 60°C (140°F) button and then
select
or
Disable
Enable
Press the Start button.
The machine sets up the pre-wash, then advances to
the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Coin/OPL type - Push the 90°C (194°F) button three
times.
Button
.
Display
One or the other will
display.
Advertisement
Table of Contents
