Advertisement
SET Layout
50PX950-AA model image
Changed Point
1. Add 3D formatter board (3DF)
- 3DF board received LVDS data and make L/R image for 3D
- Main to 3DF cable : 51pin FFC / 3DF to ASIC cable : 80pin FFC
2. Change the module ASIC board
- ISIS-F3.0 to ISIS-A1.0 for 3D
3. Add 3D IR emitter sub Assy and wafer
- 3D IR emitter make 3D sync for 3D Active glasses
- IR emitter signal form ASIC to Main board and it connect to IR emitter Assy through 4pin wafer on Main board
Power Board
Y Board
ASIC
3DF
X board
50PX950-AA model block diagram
Z Board
Main
Emitter
Advertisement
