Table of Contents
Advertisement
1.2.1 Layout contents
1. CPU socket
The motherboard comes with a surface mount Intel
Intel
Core™, Pentium
®
For more details, refer to Central Processing Unit (CPU).
2. DDR4 DIMM slots
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4
(Double Data Rate 4) memory modules.
For more details, refer to System memory.
3. Expansion slots
This motherboard supports one PCIe 4.0 x16 graphics card and two PCIe 3.0 x1 network
cards, SCSI cards or other cards that comply with the PCI Express specification.
4. Fan headers
The Fan headers allow you to connect fans to cool the system.
5. Power connectors
These Power connectors allow you to connect your motherboard to a power supply. The
power supply plugs are designed to fit in only one orientation. Find the proper orientation and
push down firmly until the power supply plugs are fully inserted.
Ensure to connect the 8-pin power plug.
•
•
6. M.2 slots (Key M)
The M.2 slots allow you to install M.2 devices such as M.2 SSD modules.
•
•
1-2
Gold and Celeron
®
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
If you are uncertain about the minimum power supply requirement for your system, we
recommend you to refer to online resources for Power Supply Wattage Calculator.
Intel
12
Gen Processors
®
th
M.2_1 slot (Key M), type 2242/2260/2280
- Intel
12
processors support PCIe 4.0 x4 mode
®
th
Intel
B660 Chipset
®
M.2_2 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode)
Socket LGA1700 designed for 12
®
Processors.
®
Chapter 1: Product Introduction
Gen
th
FAN PWM
FAN IN
FAN PWR
GND
Advertisement
Table of Contents
