Raymarine SmartPilot S1000 Installation Manual page 18

16
3. Securing the pump
Securing the pump
1.
Place the pump at the intended
location and mark holes for the
fixing screws.
3.
Countersink the pilot holes to prevent
damage to the mounting surface.
2.
Drill two 1/8" (3.4 mm) pilot holes
for the fixing screws.
4.
Slide the anti-vibration mounts onto
the pump bracket feet, then secure
the pump with the screws provided.
When the autopilot pump is
secure, fit the course computer.
S1000 Autopilot Installation Guide