Table of Contents
Advertisement
Select Menu > Settings > Profiles.
To activate the profile, select the profile and Activate.
To personalize a profile, select the profile, Personalise and from the following
options:
Ringing tone — To set the ringing tone for voice calls, choose a ringing tone from
the list.
Say caller's name — Select On to have the phone say the caller's name when the
phone is ringing.
Ringing type — When Ascending is selected, the ringing volume starts from level
one and increases level by level to the set volume level.
Ringing volume — Set the volume level for the ringing and message alert tones.
Message alert tone — Set the alert tone for text and multimedia messages.
E-mail alert tone — Set the alert tone for e-mail messages.
Vibrating alert — Set the phone to vibrate to alert for incoming calls and
messages.
Keypad tones — Set the volume level for keypad tones.
Warning tones — Activate or deactivate warning tones.
Alert for — Set the phone to ring only upon calls from phone numbers that belong
to a selected contact group.
Profile name — This setting is not shown for the General and Offline profiles.
When using the Offline profile, the phone is not connected to the GSM network. If
no SIM card is installed, to use some functions of the phone, start the phone in
Offline.
Important: In the offline profile you cannot make or receive any calls, or use other
features that require cellular network coverage. Calls may still be possible to the
official emergency number programmed into your device. To make calls, you must
first activate the phone function by changing profiles. If the device has been
locked, enter the lock code.
31
Advertisement
Table of Contents
