Advertisement
5.
WALL MOUNTING
The optional YC-280 Wall mounting bracket is required.
The YC-280 can be mounted to a one-gang electrical
box.
5.1. Mounting
Step 1. Install the YC-280 to the wall
Notes
0
Use the appropriate screws for the construction
0
Wood screws 3.5 x 20 are supplied with the
0
No fitting screws for an electrical box are
of wall.
YC-280.
supplied.
Use commercially available screws.
Step 2. Hang the station on the wall mounting bracket
hook to install.
Push down the station body in the direction
indicated by the arrows.
5.2. Installation Completion Drawing
Unit: mm
148
YC-280
Wood screw 3.5 x
20
(supplied with the
YC-280)
5.3. YC-280 Dimensional Drawing
4.6
x 6
Unit:
iting
mm
K-
IN
In desktop installations, the front operation panel can be inclined 16" from the desk surface for easier operation by
attaching the YC-280 Wall mounting bracket to its bottom surface.
6.1. Mounting
Hang the YC-280's hook on the station's wall bracket mounting slot
to install.
Push up the YC-280 in the direction indicated by the arrows.
YC-280 Wall
AN-8500MsA
h
mounting bracket
~~
Rubber foot
6.2. Installation
Unit: mm
t -
205.2
YC-280
Hook
the
YC-280)
Advertisement
