Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for sais KVM-1701SWPD-M2
- Page 1 LCD Drawer User Manual KVM-1701SWPD-M2 - 1 -...
- Page 2 This manual, covering various aspects of the equipment such as installation, setup and cascade, will help you make full use of this LCD KVM Drawer. Please read this manual carefully and install and operate the equipment according to the manual to avoid damage to this product its accessories.
-
Page 3: Table Of Contents
Table of Contents Introduction …………………………………………………………………………-4- 1.1Overview…………………………………………………………………...…. -4- 1.2 Functions & Features…………………………………… ……………...…..-4- 1.3 Hardware Requirement……………………………………………..….……-4- 1.3.1 Host Requirement………………………………………………..… -4- 1.3.2 Cables…………………………………………………………...….… -4- 1.4 Product Specifications………………………………………………..….…..-5- 1.5 LCD Specifications………………………………………………….…..……-5- 1.6 Front View………………………………………………………….…..……. -6- 1.7 Rear View……………………………………………………………..….…...-7- Installation……………………………………………………………………...……-8- 2.1 Rack Installation……………………………………………………………… -8- 2.2 Standard Installation……………….………………………………….……... -
Page 4: Introduction
* For Mac and Sun hosts, USB cable must be used for connection. Function & Features KVM-1701SWPD-M2 KVM display is integrated to a drawer type worktable of 1U height to facilitate rack installation. Supported resolution up to 1920 x 1200 , 75Hz. It meets the 1U height of rack specifications and can be installed into19 inch rack cabinet . -
Page 5: Product Specifications
1.4 Product Specifications Model KVM-1701SWPD-M2 Brightness 300cd/m2 Contrast 650:1 Angle of visibility 140°(H),120°(V) Color display 262K Keyboard 104 keys Mouse touch pad mouse Local Control Keyboard/Mouse USB 2.0 Terminal DVI-D 24 pin DVI-D female connector HD-15 female connector USB 2.0... -
Page 6: Front View
Front View Part Function Description Handle to adjust screen opsition LCD display Keyboard Touchpad LCD OSD button LCD button to control Screen Display position and image setting. Mounting bracket Install into rack cabinet Lock button Auto lock / release when lcd pull up and down USB2.0 HUB port - 6 -... -
Page 7: Rear View
Rear View Component Function Description AC Power port Standard IEC Type AC Inlet Power Switch Rock switch, turn on/off equipment main power. Audio port For audio function Connect to server or KVM. VGA port USB port Connect to server or KVM. DVI port Connect to server or KVM. -
Page 8: Installation
2 Installation 2.1 Rack Installation Step 1 Loosen screw A on both sides to slide out and remove the two rear slide rails. Rear Slide Rails Step 2 Attach the two rear slide rails to the rear vertical mounting rails of the rack cabinet using standard M6 cage nuts and screws. -
Page 9: Standard Installation
2.2 Standard Installation Please follow the installation drawing and instructions below for standard installation: * Please Shutdown the Power of Equipment Needs to be Connected * Please Pay Attention to Earthing of Equipment The standard installation is completed, and LCD KVM console can be powered on. Then power on connected hosts. -
Page 10: Lcd Kvm Console And Kvm Cascade Installation
2.3 LCD KVM Console and KVM Cascade Installation LCD KVM console port can be directly connector to another KVM Switch as cascade to Perform unified management all connected hosts. Please follow the installation drawing and instructions for standard installation: (1) Make sure to power off all equipment to be connected and existing equipment. (2) Switching slide switch on USB position (3) Use an USB / VGA cable to connected the LCD and KVM switch console port. -
Page 11: Lcd Osd Menu Setup
2.4 LCD OSD Menu Setup OSD Control buttons LCD OSD can establish and setup LCD display. Setup instructions of four buttons are as follows: Button Functions POWER Turn on or off the LCD Display Activate OSD menu, select a menu and press MENU key to confirm the MENU selection and enter the submenu. -
Page 12: Certificates
3 Certificates This product has been tested and is proved to meet requirements of Grade B electronic devices and specifications of Section 15 of FCC certification. Please observe following two conditions in operation that: (1) The equipment will not generate any harmful interruption. (2) If the equipment is interrupted, it may cause unnecessary operations.