Table of Contents
Advertisement
Chapter 4: Maintenance of Generator
Regular maintenance is an important part of your investment and provides longevity of the complete
genera-tor system. Keep it in good working condition according to the specifications outlined and it will
provide many years of dependable service.
The following generator maintenance specifications are based on a good working environment. If
working conditions are less than desirable (such as excessive dust, dirt and humidity, etc.) the
maintenance interval periods should be shortened.
When maintaining the generator set, you should operate in strict accordance with the following requirements.
Improper use and operation can cause premature failure.
Breaking-in period of New Engine
The life of the engine is greatly determined by the state of the first cycle of use. It is recommended
that the oil be replaced after only 30 hours of use on the first cycle. The new engine should be
operated as required. Abnormal engine wear will directly affect the life of generator engine.
Maintenance of the Fuel System
The genset is multi-fuel and comes preset from the factory to ether Natural Gas (NG) or Liquid
Propane (LPG), Maintenance will vary according to the fuel used.
Fuel is flammable and an explosive material. Smoking is prohibited while
When using Natural Gas (NG) or Liquid Propane (LPG)
• Before each operation, you should check all components for loose connections. Check for
fluid leaks around cylinders, pipes and hoses. Tighten as needed.
• Periodically check the gas pressure reducer and the solenoid valve sealing pad for deformities.
• Periodically check the low-pressure gas line to see if it has weathered or aged (soapy water can
be used to detect leaks).
• When maintenance of the gas line is required, gas valve must be closed before any
maintenance or repairs are carried out.
032-5095-1A-EN
working or servicing generator.
20
21
Advertisement
Table of Contents
