Raytheon HSB Radar Quick Reference

Default Display
RINGS
3nm 126°T
1/2
Targets:
Landmass
Channel buoy
Surface
vessel
CURSOR
045°
BRG R
0.28
RNG nm
HDG MODE TARGETS
Default soft key labels
These can be turned off; press any soft key to re-display them.
Different labels are displayed when you press a key.
Context Sensitive Cursor Control
When the cursor is positioned over
Delete (for example, an EBL)
special features on the display,
a text label appears to identify the 1.
feature.
Depending on the feature,
you can then move, re-size or
delete it.
Text Label Feature
2.
BOX Data box (any type)
CTR Radar centre
EBL Electronic Bearing Line
FLT Floating VRM/EBL
GRD Guard zone corner or side
MARPA
MARPA Target
MOB
Man Overboard Marker
MRK
Mark
SHM
Ship's Heading Marker
VRM
Variable Range Marker
VRM/EBL VRM and EBL
WPT Chart Waypoint
ZMB Zoom box
Status Bar
TM RV3
AUTO
H-UP
T IR
Range rings
The number and
spacing depend on
the current range, or
you can turn them off
Ship's Heading
Marker (SHM)
You can hide this
temporarily
Cursor position,
controlled by the
trackpad
Ship's position
You can move this
off-centre if required
Bearing scale,
each tick indicating
10 of azimuth
Cursor position box
Shows the current
cursor position as
either Range/Bearing
or Lat/Long. You can
SCREEN MARPA
move this box to your
preferred position
on the screen, or
turn it off.
Move (for example, an EBL)
1.
2.
3.
4.
HDG MODE
NORTH UP COURSE UP
Press the required soft key to change the heading or motion mode,
and press ENTER.
TARGETS
INT REJ EXPANSION
OFF ON OFF ON
Press the soft key to toggle INTerference REJection or Target
EXPANSION on/off.
Press the WAKES soft key until the required option (short, medium or long
wakes, or OFF) is highlighted. Press ENTER to accept.
Press CLEAR WAKES to clear existing wakes from the display.
SCREEN
CRSR BOX RNGE RNGS
OFF ON OFF ON
Press the appropriate soft key to toggle on/off Cursor Readout Databox,
Range Rings, Data Boxes or Waypoint display, and press ENTER to accept.
CANCEL MARPA BOX
MARPA
TARGET OFF ON
Press the appropriate soft key to acquire or cancel selected target.
Press the appropriate soft key to view the target data box or database list.
Status Bar
Selected range, Range rings Motion Mode
in nautical miles (displayed if
Relative Motion
rings are on) True Motion
RINGS
3nm 126°T
1/2
Range ring interval Current heading
Not displayed if if data available, or
range rings are off Course Over Ground.
Displayed in degrees
Magnetic or True
HEAD UP
TRUE REL
WAKES
CLEAR
OFF S M L WAKES
DATABOXES WAYPOINT
OFF ON
OFF ON
ACQUIRE
MARPA
TARGET LIST
Mode Indicators
displayed when function on:
Target Vectors Auto mode Target
Expansion
True Vector or Gain, Sea,
Relative Vector Tune Guard Zone
Wakes Alarms
and vector length
RM RV3
AUTO WKS EX GZ
H-UP
GST FTC RC IR
Heading mode
Normally Head Up (H-UP); Rain
Clutter
Course Up (C-UP) or
North Up (N-UP) can be
selected if heading data
available FTC Interference
Rejection
(Remote rain)