Page 1
H-PAC To deodorize the leather For longer use leave the chair in a shady Re-tighten bolts every 6 months by using outside for 1-2 days. the enclosed allen-key. *Using an electric drill can damage the chair. ASSEMBLY Please re-tighten bolts manually.
Page 2
Instructions Instructions STEP 1. STEP 2. BASE BOLT Secure with bolts. Place the seat on top of the box Insert the gas lift cylinder. Make sure to fully tighten all 10 bolts. with the bottom side up. For proper alignment: Insert the base legs into the central base Slightly under-tighten so that the bolt holes are aligned and facing up.
Page 3
User Manual Check Height TILT BOLTS TILT WASHER Order of bolts for better durability. � � Right hand � � Once all of the armrests bolts are in place, Put control mechanism at the bottom of the fully tighten each bolt into place. seat find the front sticker and tighten the bolts.