Table of Contents
Advertisement
36 • SLASH 4X4 ULTIMATE
TQ
ADVANCED TUNING GUIDE
i
Setting Lock
Once you've adjusted all of these settings the way you like them,
you may want to disable the Multi-Function knob so none of your
settings can be changed. This is especially handy if you operate
multiple vehicles with a single transmitter via Traxxas Link
Memory.
Multiple Settings and the Multi-Function Knob
It is important to note that settings made with the Multi-Function
knob are "overlaid" on top of each other. For example, if you assign
the Multi-Function knob to adjust Steering Percentage and set
it for 50%, then reassign the knob to control Steering Sensitivity,
the transmitter will "remember" the Steering Percentage setting.
Adjustments you make to Steering Sensitivity will be applied to
the 50% steering throw setting you selected previously. Likewise,
setting the Multi-Function knob to "disabled" will prevent the knob
from making further adjustments, but the last setting of the Multi-
Function knob will still apply.
TRAXXAS LINK MODEL MEMORY
Traxxas Link Model Memory is an exclusive, patent-pending feature
of the TQi transmitter. Each time the transmitter is bound to a
new receiver, it saves that receiver in its memory along with all
the settings assigned to that receiver. When the transmitter and
any bound receiver are switched on, the transmitter automatically
recalls the settings for that receiver. There is no need to manually
select your vehicle from a list of model memory entries.
Model Lock
The Traxxas Link Model Memory feature can store up to thirty
models (receivers) in its memory. If you bind a thirty-first receiver,
Traxxas Link Model Memory will delete the "oldest" receiver from
its memory (in other words, the model you used the longest time
ago will be deleted). Activating Model Lock will lock the receiver in
memory so it cannot be deleted.
You may also bind multiple TQi transmitters to the same model,
making it possible to pick up any transmitter and any previously
bound model in your collection and simply turn them on and drive.
With Traxxas Link Model Memory, there is no need remember which
transmitter goes with which model and there is never a need to
have to select any model from a list of model memory entries. The
transmitter and receiver do it all for you automatically.
To activate Model Lock:
1. Switch on the transmitter and receiver you wish to lock.
2. Press and hold MENU. Release when the status LED blinks green.
3. Press MENU three times. The status LED will blink green four
™
Model
times repeatedly.
4. Press SET. The status LED will blink green in single-
flash intervals.
5. Press SET once. The status LED will blink red
once repeatedly.
6. Press MENU once. The LED will blink red
twice repeatedly.
7. Press SET. The LED will blink rapidly green.
The memory is now locked. Press MENU and SET to return to
driving mode.
Note: To unlock a memory, press SET twice at step 5. The LED will
blink rapidly green to indicate the model is unlocked. To unlock
all models, press MENU twice at step 6 and then press SET.
To delete a model:
At some point, you may wish to delete a model you no-longer drive
from the memory.
1. Switch on the transmitter and receiver you wish
to delete.
2. Press and hold MENU. Release when the status LED blinks green.
3. Press MENU three times. The status LED will blink green four
times repeatedly.
4. Press SET once. The status LED will blink green
once repeatedly.
5. Press MENU once. The status LED will blink green
twice repeatedly.
6. Press SET. The memory is now selected to be deleted.
Press SET to delete the model. Press and hold MENU to
return to driving mode.
Advertisement
Table of Contents
