Replacing the I/O Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the I/O-board cable into the I/O-board cable connector and press
down on the latch to secure the cable.
2
Turn over the I/O board and use the alignment post on the computer
base to place the I/O board in position.
Post-requisites
1
Replace the
palm
2
Replace the
hard
3
Replace the
wireless
4
Replace the
memory
5
Replace the
base
6
Replace the keyboard.
7
Replace the battery.
52
Computer. After working inside your
rest.
drive.
card.
module(s).
cover.
After Working Inside Your