Advertisement
To power the unit, plug the power cord (included) into the AC Power Input on the back of the unit and a standard AC power outlet.
For battery power, this unit requires 6 C-size, batteries (not included).
CD
Loading and Playing a CD
Note: This unit is not compatible with MP3 CDs.
1. Open the CD door and place a CD in the
boombox, label side facing up.
2. Close the CD door.
3. Adjust the Source Switch to CD mode.
4. Press the Play/Pause button to begin playing
the loaded disc.
Programming a CD
1. Press the Stop button to stop a loaded CD.
2. Press the Program button. "01" will flash on the
display.
3. Press the Skip/Search buttons to select a track.
4. Press the Program button to add the selected
track to the program.
5. Repeat steps 3 and 4 to program up to 20 tracks
to play in a specified order.
6. Press the Stop button to cancel a program.
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.gpx.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.gpx.com
Pour télécharger ce guide de l'utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d'assistance sur: www.gpx.com
For Warranty Information and the most up-to-date version of this User's Guide, go to www.gpx.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2019 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
Power & Battery
Radio
Radio Reception
An AM and FM antenna is built into the radio.
To improve radio reception, adjust the position
of the boombox.
Playing the Radio
1. Slide the Source Switch switch to AM or FM
radio mode.
2. Adjust the Tuning dial to tune the radio.
International Support
3.5 mm Audio input
Using the Aux In
3.5 mm audio input cable not included.
1. Plug one end of a 3.5 mm audio input cable into
the Aux In input on the back of the unit, and
plug the other end of the cable into the audio
output on an MP3 Player or other audio source.
2. Press the Power button to power the unit on.
3. Slide the Source Switch of the unit to Aux In.
4. Audio played through the connected device will
now be heard through the speakers.
Made
Protect for Today
Sustain for Tomorrow
Green
Advertisement
