KTM 300 EXC ERZBERGRODEO 2023 Owner's Manual page 148

18 SERVICE WORK ON THE ENGINE
146
–
Remove oil screen
–
Check the oil screen for damage.
» If the oil screen is damaged:
–
Change the oil screen.
S03505-10
–
Insert the oil screen and mount the angle piece with a new
hose clamp.
Hose clamp pliers (60029057000)
S03506-10
–
Mount throttle valve body
–
Remove the locking piece and position the subframe.
Info
Pay attention to intake flange
–
Join plug-in connector
–
Position and tighten clamps
Guideline
Screw, intake
flange/reed valve
housing
S04904-10
–
Mount and tighten screws
Guideline
Screw, sub-
frame bottom
–
Remove screws
–
Mount and tighten screws
Guideline
Screw, sub-
S04902-10
frame top
9
and clean it.
7
.
6
.
5
of the rear brake light switch.
4
of the throttle valve body.
M6 6 Nm (4.4 lbf ft)
2
.
M8 30 Nm (22.1 lbf ft)
3
.
3
.
M8 35 Nm (25.8 lbf ft)
Loctite ® 2701™
Loctite ® 2701™