Sony BRAVIA KD-65X8500A Operating Instructions Manual page 25

SU-WL500
Mounting Hook
Stand Cover *
~
• Attach the Mounting Hook using the four screws supplied with the Wall-Mount Bracket.
• Before mounting the TV to the wall, detach the Table-Top Stand from the TV. See "Detaching the Table-Top
Stand from the TV" (page 7) for details.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
original holes on the rear of the TV.
SU-WL400
4
×
Stand
Cover *
Band F
~
• Attach the Pulleys and Screws (+PSW6 x 20) to the upper rear of the TV.
• Attach the Band and Spacers with Screws (+PSW6 x 50) to the lower rear of the TV.
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• Screw (+PSW 4 x 20)
D
Be sure to store the unused parts in a safe place for future use. Retain this manual for future reference.
• Before mounting the TV to the wall, detach the Table-Top Stand from the TV. See "Detaching the Table-Top
Stand from the TV" (page 7) for details.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
original holes on the rear of the TV.
Screw (+PSW 6 × 16)
Pulley B
Spacer E
Screw (+PSW 6 x 50) G
, Bush (M4) and Screw (+PSW 4 x 50)
H
* After mounting the TV to the wall, tilt the TV
to the front to detach the Stand Cover
from the TV.
Screw (+PSW 6 x 20) C
will not be used depends on model.
I
* After mounting the TV to the
wall, tilt the TV to the front to
detach the Stand Cover from
the TV.
(Continued) 25
GB
GB