Hitachi 50RC6 Information Manual page 3

WARNING: To comply with FCC RF exposure compliance requirements, a separation
distance of at least 8 inches must be maintained between this device and all
persons.
This Television receiver will display television closed captioning, (
provides text-to-speech audio, in accordance with FCC rules.
Location of the required Marking
The rating sheet and the safety caution are
on the rear of the unit.
47 CFR § 2.1077 Compliance Information
Unique Identifier: 50RC6
Responsible Party – U.S. Contact Information
Hitachi America, Ltd.
2420 Fenton Street, Suite 200
Chula Vista, CA 91914-3556
Tel: 800.HITACHI (800.448.2244)
ATTN: Customer Relations
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference and (2)This device must accept any
interference received, including interference that may cause undesired operation.
Power source
This television is designed to operate on 100 - 240 volts 50/60 Hz, AC current. Insert the
power cord into a 100 - 240 volts 50 - 60 Hz outlet.
To prevent electric shock, do not use the television's (AC) plug with an extension cord,
receptacle, or other outlet unless the blades can be fully inserted to prevent blade
exposure.
Never connect the television to direct current or anything other than the specified voltage.
Warning
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture.
Caution
Never remove the back cover of the television as this can expose you to very high
voltages and other hazards. If the television does not operate properly, unplug the
television and call your authorized dealer or service center.
Adjust only those controls that are covered in the instructions, as improper changes or
modifications not expressly approved by Hitachi could void the user's warranty.
Supplier's Declaration of Conformity
or ), and
3