Volvo XC90 2019 Quick Manual page 11

OVERVIEW, INTERIOR
Centre display is used to control many of the car's main func-
tions, e.g. media, navigation*, climate control, driver support
systems and in-car apps.
The driver display shows information on the drive, e.g. speed,
engine speed, navigation* and active driver support. It is possi-
ble to choose what is to be shown in the driver display via the
app menu, which you open using the right-hand keypad on the
steering wheel. Settings can also be made via
Car Displays in the centre display's top view.
Head-up display* is a complement to the car's driver display
and projects information on the windscreen. It is activated via
the centre display's function view.
Start knob is used to start the car. Turn clockwise and release
for ignition position I. Hold the brake pedal depressed and turn
the start knob clockwise to start the car. For cars with manual
gear changing, the clutch pedal must also be depressed. For
cars with automatic gear changing, gear position P or N must
be selected. Switch off the car by turning the start knob clock-
wise.
Driving modes* are set using the control on the tunnel console.
The car always starts in Comfort mode. Press in the control and
roll it to select between
Comfort
* and
Polestar Engineered
firm by pressing the control. With
driving mode according to your preferred driving characteris-
tics. The individual driving mode is activated in
Car Individual Drive Mode
Parking brake is activated when you pull the
upwards, at which point a symbol in the driver display illumi-
nates. Release it manually by pushing down on the control and
depressing the brake pedal at the same time. Using automatic
braking when stationary (
Settings
, , ,
Eco Off Road Dynamic
in the centre display. Con-
Individual
you can adapt a
Individual
Settings
in the centre display's top view.
control
), the brake pedal can be released
while maintaining braking effect when the car has stopped, e.g.
at traffic lights.
Remember that both Automatic braking when stationary and
Automatic application of the parking brake must be deactivated
for an automatic car wash. Deactivate automatic parking brake
application in the centre display's top view under
My Car Parking Brake and
My
Switch for passenger airbag* is located on the end face of the
instrument panel on the passenger side and can be accessed
when the door is open. Pull the switch out and turn to ON/OFF
in order to activate/deactivate the airbag function.
Glovebox is opened when you use the
/
My
Settings
Suspension.
button.
01