Panasonic LUMIX DMC-TZ70 Basic Operating Instructions Manual page 11

1 Flash
2 Self-timer indicator/
AF Assist Lamp
3 Control ring
4 Lens barrel
5 Lens
• Do not touch the lens barrier.
6 Viewfinder (LVF)
7 Diopter adjustment dial
• Adjusts the focus in the viewfinder.
8 Eye sensor
• The display is automatically switched
to viewfinder when your eye or an
object moves close to the viewfinder.
9 [LVF] button/[Fn2] button
• Use this to switch display between
viewfinder and LCD monitor.
10 Charging lamp (Red)/
Wi-Fi connection lamp (Blue)
®
• The colour of the lamp differs
depending on the function.
11 Strap eyelet
• We recommend using the supplied
hand strap to avoid dropping the
camera.
12 Monitor
13 [HDMI] socket
• Do not connect any other cables
except the HDMI micro cable. Doing
so may cause malfunction.
14 [AV OUT/DIGITAL] socket
• This socket is also used when
charging the battery.
15 Speaker
16 Microphones
17 Mode dial
• Use this to select the recording mode.
18 Shutter button
19 Zoom lever
20 Motion picture button
21 Camera [ON/OFF] button
22 Tripod mount
• Do not attach this unit to tripods that
have screws with a length of 5.5 mm
(0.22 inch) or more. Doing so may
damage this unit.
• If you are not holding the camera
while using zoom, such as during
self-timer recording, [Time Lapse
Shot] recording, or remote recording,
the camera could tilt when the lens
barrel extends, so be sure to secure
the camera in place on a tripod or by
other means.
• It may not be possible to attach
certain types of tripods properly.
23 Card/Battery door
24 Release lever
25 [Wi-Fi] antenna
26 NFC antenna
27 [Wi-Fi] button
28 Playback button
• Use this to select the recording mode
or playback mode.
29 [MENU/SET] button
30 [Q.MENU/ ] / [ ] button
• You can display the Quick Menu and
erase pictures.
31 [DISP.] button
• Use this to change display.
32 Control dial
• Turn the dial to select setting items
and change setting values.
33 [Fn1] button
34 Cursor button
(ENG) SQT0623
11