Fuel Shut Off Valve; Cutting Height Adjuster; Seat Adjustment Lever - Husqvarna EZ4824 CA Operator's Manual

Table of Contents

Advertisement

Fuel Shut Off Valve

The fuel shut off valve is located at the left rear of the
seat. The valve is off when the handle tab is turned
perpendicular to the fuel line.
IMPORTANT INFORMATION
Always raise the deck to the highest position
for transport.

Cutting Height Adjuster

The deck cutting height is obtained by pressing the
button and moving the lever forward to the correct
cutting height on the cutting plate. The cutting height
range is from 1½" (38mm) to 4" (102mm) in ½ (13mm)
increments. The heights are measured from the
ground up to the blade tip with the engine not running.
IMPORTANT INFORMATION
In order to obtain an even cutting height, it is
important that the air pressure in all tires is 15
psi / 103 kPa / 1 bar.

Seat Adjustment Lever

The seat can be adjusted lengthways. When making
adjustments, the lever under the right front side of the
seat is pulled to the side, after which the seat can be
moved backward or forward.
22
CONTROLS
Fuel shut off valve in the CLOSED position
The mower deck's lifting lever
Lengthways adjustment
8011-419
8058-019
8061-228

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ez4824Ez24t966612901966659501966659601

Table of Contents