Table of Contents
Advertisement
4.5 Connect Function
Use this function with the
Infinite Plancha
This function connects two right side
cooking zones under the accessory and
they operate as one.
First set the heat setting for one of the
right side cooking zones.
To activate the function: touch
set or change the heat setting touch one
of the right control sensors.
To deactivate the function: touch
The cooking zones operate independently.
4.6 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
(
Immediately touch the correct heat
setting. After 5 seconds
To deactivate the function: change the
heat setting.
4.7 Power function
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
time. After this time the induction cooking
zone automatically sets back to the
highest heat setting.
Refer to "Technical
information" chapter.
To activate the function for a cooking
zone: touch
.
1) The accessory is not supplied with the appliance. For more information, please contact
your local supplier.
1)
accessory.
. To
.
comes on).
comes on.
comes on.
To deactivate the function: change the
heat setting.
4.8 Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the cooking zone then set the
function. You can set the heat setting
before or after you set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer to set the time (00 - 99 minutes).
When the indicator of the cooking zone
starts to flash slowly the time counts
down.
To see the remaining time: set the
cooking zone with
cooking zone starts to flash quickly. The
display shows the remaining time.
To change the time: set the cooking
zone with
. Touch
To deactivate the function: set the
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and
00 flashes. The cooking zone
deactivates.
To stop the sound: touch
CountUp Timer (The count up timer)
You can use this function to monitor how
long the cooking zone operates.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch
the timer.
comes on. When the
ENGLISH
of
. The indicator of the
or
.
and touch
. The
.
of
9
Advertisement
Table of Contents
