Cisco Aironet 1815w Getting Started Manual page 11

Figure 3 Back of the AP
1
2
3
Mode button
1
10/100/1000BASE-T PoE uplink port.
This port supports:
• Inline power capability
2
• Auto-MDIX (automatically support
either straight through or crossover
cables)
802.3af/at power over the Ethernet interface
Recess for the hook feature of wall-plate. The
AP attaches to the wall-plate by means of this
3
recess of the wall-plate hook.
4
5
Console port, under a mylar cover.
You will require the custom four-pin adapter
4 AIR-CONSADPT= to use this port.
Passive Pass-Through port.
It is an RJ-45 port, from the back of AP to the
base of the AP.
5
11