Main Board Remove (Int Model) - Samsung NP950XDB Repair Manual

Main Board Remove (INT Model)

1
Use a cross-head screwdriver to remove the screw located on the SSD, then pull the
SSD horizontally out of the SSD socket to separate it.
Be careful not to damage the near components.
If two SSDs are installed, separate the other SSD using the same method.
•
Check the number of screws that have been removed, and store them carefully
•
to make sure that no unassembled screws are left inside the computer during
assembly.
2
Using a cross-head screwdriver, remove the 2 screws on the main board bracket and
separate it.
Check the number of screws that have been removed, and store them carefully
to make sure that no unassembled screws are left inside the computer during
assembly.
Disassembly and Assembly
26