Samsung WW11B Series Service Manual page 15

 Disassembly
Part
Assy Panel Control
(Simple)
This Document can not be used without Samsung's authorization.
Figure Description
- Before you start, disassemble Assy Cover Top, Assy
Drawer.
1. Remove cover screw and then 1 screws holding
the Panel control using (+) screw driver.
2. Slide the Assy Cover Panel about 10mm to the
left and pull it forward.
3. Hold the Assy Cover Panel while pulling it upwards
and disassemble the terminal to remove it.
Press the hook while removing the terminal.
Disassembly and Reassembly _ 12