Samsung VP-D361W Service Manual page 38

Disassembly and Reassembly
4-2-4 Arm Tension Ass'y, Reel Disk S
4-2-4(a) Disassembly
Note 1 : When disassembling, take care not to deform
the part. Do not stain the post.
1) Separate the Spring Tension Πfrom Hook of Sub
Chassis.
2) Remove the Washer Slit ˇ, and then lift up the Arm
Tension ¨.
3) Lift up the Reel Disk S ˆ.
WASHER SLIT ˇ
SPRING TENSION Œ
SUB CHASSIS HOOK ´
4-10
All manuals and user guides at all-guides.com
PIN Ø
Fig. 4-10 Arm Tension Ass'y, Reel Disk S
4-2-4(b) Reassembly
1) Mount the Reel Disk S ˆ.
2) After pushed Arm Tension Ass'y ¨ in the direction
"A", and then insert into the Pin Ø.
3) Insert the Washer Slit ˇ, and then hang the Spring
Tension Œ to Sub Chassis Hook ´ and Arm Tension
Hook ∏.
Note 1 : When reassembling or dsiassembling,
position of Spring Tension Πis same.
Note 2 : When moving inspecting, must be inspect
Back Tension.
Note 3 : When reassembling, confirm that pin of Arm
Tension insert into the Guide Cam.
∏ ARM TENSION HOOK
¨ ARM TENSION ASS'Y
ˆ REEL DISK S
Samsung Electronics