Table of Contents
Advertisement
O
perations
1. Unscrew the top of your BISSELL
BigGreen Commercial Backpack
Vacuum. Make sure the micro filter bag
and the disposable bag are inside.
Remove both to make sure filter on top of
motor has not shifted off the motor dur-
ing shipping. Once checked put micro
filter cloth and disposable bag back and
screw back on top lid.
2. Both the micro filter cloth bag and dispos-
able bag, filter the air while holding all
debris. The micro filter cloth bag with its
rubber top provides the seal for the vacuum
while also filtering the air. Replace or empty
each as necessary.
3. Make sure lid is screwed and locked on the
vacuum. Take the vacuum hose and push it
into round opening on top of lid.
4. Put backpack on and adjust sholder straps
and waist belt until backpack is comfort-
able. The harness is made for a custom fit.
5. Attach hose to commercial wand. Attach
desired tool to bottom of wand by loosen-
ing nut and pushing in tool. Tighten nut until
tool is in place. Tool will swivel when using
side to side motion.
NOTE: Never take nut off wand or
risk losing metal ring inside nut.
The metal ring holds tool in place in
its slotted groove.
6. Your BISSELL BigGreen Commercial
Backpack Vacuum comes with a switch box
that has both the on/off switch and power
cord. It has Velro on the side so it can be
removed from the waist belt and put back
at a comfortable setting for the user.
7. When backpack vacuum is not in use,
always store in a dry area or place.
w w w . b i s s e l l c o m m e r c i a l . c o m
ATTENTION:
Some Berber carpets have a
tendency to fuzz with wear.
Repeated strokes in the same
area with an ordinary vacuum
or deep cleaner may aggravate
this condition.
1.
3.
5.
5
1 - 8 5 5 - 5 4 4 - 7 3 3 6
Advertisement
Table of Contents
