Advertisement
Operation Guide 5381/5482
Mode Reference Guide
The mode you should select depends on what you want to do.
To do this:
View the current date in the Home City
Confi gure Home City and daylight saving time (DST)
settings
Confi gure time and date settings
View the current tide level
Take temperature readings
View tide changes over the next 12 hours
Count objects
View tide level and moon age for a specifi ed date
and time
View the current time in one of 48 cities
(31 time zones) around the globe
E-10
Selecting a Mode
Press C to cycle between the modes as shown below.
To return to the Timekeeping Mode from any other mode, hold down C for about
two seconds.
In any mode (except a setting mode), press B to illuminate the display.
Thermometer
Tide Change
Mode
Mode
D
* The mode that appears fi rst is the one that was selected when you last used the Thermometer
or Tide Change mode.
E-12
General Functions (All Modes)
The functions and operations described in this section can be used in all of the
modes.
Auto Return Features
The watch will automatically return to the Timekeeping Mode if you do not perform
any operation for a certain amount of time, as described below.
Mode
Thermometer, Alarm, Tide/Moon
2 to 3 minutes
Time or other setting mode
(information fl ashing on the display)
Tide Change
After the tide change indication process is complete
Scrolling
The B and D buttons are used on the setting mode to scroll through data on the
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
E-14
2. Holding down B again as you press C will cause the hands to return to their
normal positions (normal timekeeping).
Note
This operation can be performed in any mode. In the case of a setting mode
(setting fl ashing on the screen), the hands will move out of the way automatically,
even if you do not perform the above operation.
Watch button functions are the same regardless of whether the hands are move
out of the way or at their normal positions.
Changing to another mode will cause the hands to move back to their normal
positions.
The hands also will move back to their normal positions automatically if no
operation is performed for about one hour.
E-16
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down A until ADJ
appears.
This indicates the city code setting mode.
The hour and minute hands automatically move out of
the way at this time (page E-15).
2. Press D (East) and B (West) to select the city code
you want to use as your Home City.
Keep pressing D or B until the city code you want
City Code
to select as your Home City appears on the display.
For details about city codes, see the "City Code
Table" at the back of this manual.
E-18
Enter this mode:
See:
Timekeeping Mode
E-17
Thermometer Mode
E-25
Tide Change Mode
E-33
Counter Mode
E-41
Tide/Moon Mode
E-35
World Time Mode
E-42
Timekeeping Mode
C
C
D*
Approximate Elapsed Time
To do this:
Use the stopwatch to measure elapsed time
Use the countdown timer
Set an alarm time
Counter Mode
Tide/Moon Mode
C
Countdown Timer
Alarm Mode
Mode
C
C
Moving the Hands Out of the Way for Better Viewing
You can use the procedure below to temporarily move the hour and minute hands
out of the way to better view what is on the display.
1. While holding down B, press C.
This will cause the hour and minute hands to move to a location where they do
not block your view of the tide indicator and/or digital display.
Example: When the current time is 8:20
Flashes while the hands are moved out of the way.
Timekeeping
Use the Timekeeping Mode to set and view the current
Minutes
time and date.
Each press of A cycles the digital display contents as
Hour
shown below.
Month-Day
Day of the Week
A
Month-Day
Tide indicator
(Page E-32)
3. After the setting is the way you want, press A to return to the Timekeeping
Mode.
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
*
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
Enter this mode:
See:
Stopwatch Mode
E-46
Countdown Timer Mode
E-49
Alarm Mode
E-52
E-11
World Time Mode
C
C
Stopwatch Mode
C
E-13
E-15
Seconds
Hour : Minutes
A
A
PM indicator
A
E-17
E-19
Advertisement
