Local Update - D-Link DSL-2750U User Manual

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual

Local Update

!
Attention! Do not turn off the router before the firmware upgrade is completed. This may
cause the device breakdown.
To update the firmware of the router locally, follow the next steps:
1. Download a new version of the firmware from www.dlink.ru.
2. Click the Browse button on the System / Firmware upgrade page to locate the new
firmware file.
3. Click the Update button to upgrade the firmware of the router.
4. Wait until the router is rebooted (about one and a half or two minutes).
5. Log into the web-based interface using the login (admin) and the current password.
After the upgrade is completed, the new version of the firmware will be displayed in the top left
corner of the page.
If after updating the firmware the router doesn't work correctly, please restore the factory default
settings. To do this, place the mouse pointer over the System caption in the top left corner of the
page and click the (Reset to factory) icon. Wait until the router is rebooted.
Page 167 of 181
Configuring via Web-based Interface