Power On & Settings - Bissell POWERGROOM SWIVEL PET 2252 Series User Manual

Table of Contents

Advertisement

Power ON & Settings
WARNING
To reduce the risk of injury from moving parts while the vacuum is turned ON, always
move the vacuum via the rolling wheels by using the upper handle at the back of the
vacuum. Do not carry the vacuum while it is running. Always place vacuum on floor with
handle in upright position when using tools.
1
Press the red Power Pedal with your
foot to turn the vacuum ON
again to turn your vacuum OFF
3
TIP: For optimal carpet cleaning performance, adjust to the lowest practical setting. If
your vacuum is difficult to push, adjust to the next higher setting.
NOTE: Rotating floor brush continues to rotate while tools are in use. Never place fingers
under the vacuum when it is running. Never place Powerfoot on furniture or uneven
surfaces. Do not place vacuum close enough to objects to pull into rotating brush.
NOTE: Certain carpets and low humidity conditions may generate small static
discharges. Static discharges are harmless and are not associated in any way with the
main power supply.
6
www.BISSELL.com
2
and once
Press the Recline Pedal and pull Handle
.
back towards you.
Turn the dial on the foot of the vacuum to the
desired setting. If the dial is difficult to turn, tilt the
vacuum back slightly to take the weight off the foot
while turning.
Lowest setting –
Medium setting – For medium pile carpet.
Highest setting – For high pile and most shag carpet.
For low pile carpet or bare floors.
To pick up debris, it may be
necessary to move up one setting.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents