Server Unit Su X86 - Fujitsu BS2000 SE Series Operating Manual

2 Server Unit SU x86

This section describes the Server Units SU310 in an SE server SE310, SU320 in an SE server SE320 and SU330
in an SE server SE330. SU330 can optionally also be present in an SE730.
i
Components and ports which are not used are not described below.
In the SU x86 the base system X2000 enables BS2000 to execute (in Native mode or on BS2000 VMs).
An SU310 occupies two height units (HUs) in the rack, an SU320 as well as an SU330 occupies three HUs.
Features
For SU310 there are three models with four processors (16 cores) each, for SU320 one model with also four
processors. Capacity on Demand permits temporary processor attachment. For SU330 11 models are available
with up to 16 BS2000 processors.
The size of the main memory (for BS2000 and for the base system X2000) is 128 GB in the basic configuration.
These models can be enhanced to up to 512 GB.
For the input/output system the Server Unit contains two 2.5'' SAS hard disks with a capacity of 600 GB each (on
SU310 and SU320) resp. two SATA hard disks with a capacity of 960 GB each (on SU330) in the basic
configuration, which are mirrored.
The Server Unit contains a DVD-RW drive.
Fibre Channels operating at 8 or 16 Gbps are available for connecting peripherals.
At least one 4-port LAN card is connected on the Server Unit. The first two ports are used for the connection to
the Net Unit, and the other two can, if required, be used for BS2000 applications. Optionally LAN controllers
operating at 10 Gbps can also be used.
Each SU x86 is equipped with two power supply units.
6