In the following example I will show you how to set the time for 10:30.
Make sure that you have removed all packaging from your oven.
NOTE: Information Blink
For mode setting, blink will
guide to next step.
When your oven is plugged in for the
first time or when power resumes after a
power cut, a '0' will be shown in the
display; you will have to reset the clock.
If the clock (or display) shows any
strange looking symbols, unplug your
oven from the electrical socket and plug
it back in and reset the clock.
Make sure that you have correctly installed your oven as described
earlier in this book.
Press 시 시 계 계 / / 램 램 프 프 .
Turn Dial (시 시 간 간 / / 무 무 게 게 조 조 절 절 ) knob until display shows "10:00".
Press 선 선 택 택 for hour confirmation.
Turn Dial (시 시 간 간 / / 무 무 게 게 조 조 절 절 ) knob until display shows "10:30".
Press 선 선 택 택 .
The clock starts counting.
11
Setting the
Clock