Table of Contents
Advertisement
8
After connection, this product may
perform a software update. Upgrade to the
latest software when it is your first time set
up. The software upgrade may take several
minutes. Do not unplug your speaker, turn
off your device, or leave the network
during the update.
AirPlay setup
Use AirPlay to set up the Wi-Fi connection of
iOS device (iOS7 or later) and soundbar.
1
iOS device: Settings > Wi-Fi > select home
network [Play-Fi device (xxxxxx)]
2
Launch the Philips Sound App powered by
DTS Play-Fi. Follow the instructions in the
App to connect this product to your Wi-Fi
network.
» After successful Wi-Fi connection,
the Wi-Fi light indicatar on the front
cabinet will stop pulsing and turn solid.
Once you set up this product on your
Wi-Fi network, you can control it from
any smartphone or tablet on the same
network.
» When using the APP to play music, the
display panel will show PLAY-FI.
3
After connection, you can change the
device name. There are several names
to choose from or create your own by
choosing Custom Name at the end of the
name list. Otherwise, it follows the default
name.
4
After connection, this product may
perform a software update. Upgrade to the
latest software when it is your first time set
up. The software upgrade may take several
minutes. Do not unplug your speaker, turn
off your device, or leave the network
during the update.
Note
•
After connection, the product may perform a software
update. Upgrade is required after initial set up. Without
the upgrade, not all product features can be available.
•
When the first time set up is not successful, hold down
the Wi-Fi button on soundbar for 8 seconds until the
second tone can be heard and the Wi-Fi light is changed
to slow pulse. Reset the Wi-Fi connection, restart the
app and start the set up again.
•
If you want to change from one network to another, you
need to set up the connection again. Press hold down
the
(Wi-Fi) button on the soundbar for 8 seconds
to reset the Wi-Fi connection.
WPS mode
If your router has Wi-Fi Protected Setup (WPS),
you can set up the connection without entering
a password.
1
Press and hold the Wi-Fi button for
4 seconds. You will hear a tone and the
Wi-Fi light will begin in double blink.
2
Press the WPS button on
your router.
The
button is normally
marked with this WPS
logo.
3
Follow the instruction in Philips Sound App
powered by DTS Play-Fi to start the pairing.
Note
•
WPS is not a standard feature on all routers. If your
router does not have WPS then use Standard Wi-Fi
Setup.
•
Press the
(Wi-Fi) button once if you want to
exit the WPS mode or it will automatically exit after
2 minutes.
WPS
15
Advertisement
Table of Contents
