Table of Contents
Advertisement
STEP 2 Flooring
STEP 3 Spacing (applicable models only)
A
B
Untitled-1 35
A
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each foot of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use thick paper or cloth such as
an old carpet along the movement path.
Attach the provided spacers (A) and the
sponge (B) as shown in the figure to for
optimal energy efficiency.
CAUTION
If the refrigerator is not flush with the
cabinet, you may cut the spacers to make
the refrigerator flush with the cabinet, but
the optimal energy efficiency cannot be
guaranteed.
English
35
2022-11-25
10:37:01
Advertisement
Table of Contents
