Works With Alexa; Apple Airplay And Homekit - TCL C745 Series Operation Manual

4. For the first time, depending on different types of
phones, there are two situations: 1) an invitation
prompt appears, select "Accept" and press OK to
connect. 2) enter a correct PIN code to connect as
per the PIN message on the phone.
5. Press the option button to choose the audio source.
6. To exit the multi visual function, press
dialog box, then select OK and press OK to confirm.
Notes:
- This feature is not available in any of the cases
below:
a) when TV is in HbbTV, Netfilx or Media Player.
b) if the video from phone/DTV is scrambled.
c) when the capacity of required video decoding
exceeds 4K 60Hz.
- When in full screen mode, due to the compatibility
of the third party's Apps, there might occur failure to
return to the dual views.
- Multiple phones can be used. When in dual view
mode, use Left/Right to move the focus to TV view
and then cast another phone to the TV.
- To check all available history list, select
> System > Multi Visual Settings > Connection
List and press OK to enter.

Works with Alexa

To use the Works with Alexa function, you will need a
device like an Amazon Echo or Amazon Echo Dot (Sold
Separately). Set up your Amazon device. Then, on your
TV go to the Homepage Menu, select Your apps, and
add "Works with Alexa". Then follow the on screen
prompts. Please note that within the Alexa app on your
phone, you will need to enable the TCL Assistant Skill,
through the Alexa Skills Menu.

Apple AirPlay and HomeKit

Wirelessly share content with your TV using AirPlay and
control your TV using the Home app on your iPhone,
iPad, or Mac. You can set up AirPlay and HomeKit at any
time in Settings menu.
The function is enabled by default. To use the function,
make sure your iPhone, iPad, or Mac is iOS or iPadOS
device and the WiFi on the iOS or iPadOS device is
turned on. Then follow the steps below to operate.
1. Press on the remote control, select
System > AirPlay and HomeKit Settings
AirPlay and HomeKit and press OK to enter, or
press or (if available) on the remote control,
then select AirPlay > AirPlay and HomeKit
Settings and press OK to enter.
Using More of Your TV
2. Press Up/Down to select the desired item and press
OK to enter the corresponding submenu.
3. Press
4. For the first time, activate the screen mirroring
function on your iPhone, iPad, or Mac and choose
the TV's name you want to connect in the searching
to display a
list.
5. If an AirPlay passcode appears on your TV screen,
enter the passcode on your iOS or iPadOS device.
6. To stop mirroring your iOS or iPadOS device, open
Control Center, tap screen mirroring, then tap stop
mirroring.
Notes:
- If your WiFi is turned off, press
control, select
Wi-Fi, and press OK to turn it on.
- To disable the feature, select
> AirPlay and HomeKit Settings > Apple AirPlay
and HomeKit > AirPlay and press OK to turn it off.
- Apple, AirPlay and HomeKit are trademarks of Apple
Inc., registered in the U.S. and other countries.
- This Smart TV Pro is compatible with AirPlay 2 and
(Settings)
HomeKit. iOS 12.3 or later or macOS 10.14.5 or
later is required.
(Settings) >
>
Apple
15
to return to the previous menu.
on the remote
(Settings) > Network & Internet >
(Settings) > System