Table of Contents
Advertisement
Satellite Receiver Features
Displaying On-screen Guides
Each time you press the remote control's GUIDE button, a different type of program guide appears:
VCR
ON OFF
TV
DVD
AUX1
AUX2
DIRECTV
MUTE
SKIP
+
CH
CH -
GO BACK
FETCH
GUIDE
INFO
(-)
MENU
CLEAR
1
2
3
4
5
6
7
8
9
ANTENNA
WHO INPUT
0
STOP
PAUSE
18
The Detail Guide
The Detail Guide shows six channels (four with the toolbar) in a time-and-channel format, with
program information for the highlighted program. A small window showing the program you
were watching before entering the program guides is displayed in the upper left hand corner
(you can preview other channels in the Detail Guide by highlighting channel numbers instead of
the program titles).
Notes: By default, the Detail Guide appears when you press GUIDE on the remote control. You can change the
default guide from the Detail Guide to the Grid Guide.
Select Personal Settings from the Main menu, then select the profile to be changed, then select Default Guide.
Use the remote control's arrow buttons to highlight Grid Guide, then press the SELECT button to activate your
choice.
The Grid Guide
The Grid Guide shows nine channels (seven with the toolbar) in a time-and-channel format. A
small window showing the program you were watching before entering the program guides is
displayed in the upper left hand corner (you can preview other channels in the Grid Guide by
highlighting channel numbers instead of the program titles).
Getting Around In the Guides
This section describes how to change channels and move around a program guide.
Digit Buttons (0–9)
You can point quickly to any channel in the program guide by entering the channel number with
the digit buttons (0–9). For example, to point to channel 228, press the digits 2-2-8, on the
remote control.
Scrolling Channel By Channel
CH Buttons
The programs that you see on the TV screen make up one section—or page—of the total program
guide. You can scroll one line at a time using the arrows: point to other times with the left and
right arrows; point to other channels with the up and down arrows.
Scrolling Page By Page
Arrow
If you want to scroll up or down through the program guide faster, press the CH buttons on the
Buttons
remote control. The highlight scrolls a page at a time.
Scrolling Forward and Reverse
Digit
Buttons
To scroll forward one page at a time, press the remote control's PLAY button while in DIRECTV
mode. To go forward or reverse by a 6-hour block of time, use the FORWARD and REVERSE
buttons on the remote control.
Note: Your digital satellite receiver can store up to seven days of programming information. Getting all this
information can take up to 12 hours to download.
REWIND/
FORWARD
Buttons
Chapter 3
Advertisement
Table of Contents
