Setting The Rating Limit - RCA DRD420RE User Manual

The Menu System
Add or Delete All Channels
You might be able to save time when creating a channel list by using
the Add All Channels option or the Delete All Channels option before
removing or adding individual channels.
Also, program providers may make additional channels available. To
prevent new channels from appearing in a profile channel list, choose
Delete All Channels and checkmark only the channels you want to
appear in the list.

Setting the Rating Limit

The Rating Limit menu enables you to set a maximum rating viewing
limit for rated movies (based on the MPAA rating system).
• Note that the rating limit cannot be enforced if a program has not
been rated, if rating information for that program is not
transmitted by the program provider, or if the system has not been
locked.
1. Point to Set Rating Limit and press OK.
Use the arrow buttons to move the selector up and
down.
2. Use the up and down arrow buttons to move the rating selector to
the highest rating you want to be able to view. In the preceding
illustration, movies that are rated up to and including a "PG-13"
rating can be viewed.
After the Rating Limit is set and the system is locked, you must enter the
system password to watch programs with a rating higher than your
limit.
46
Important!
You need to lock the system in order
for rating limits, channel limits,
viewing hours, and spending limits to
go into effect.
After you lock the system, you need
to enter the system password to edit
the limits. See "Locking the System,"
later in this section, for details.