RCA DRD435RH User Manual page 37

Remote Setup
This allo ws you to choose which r emote contr ol button will contr ol the digital satellite receiver. You can choose betw een DIRECTV and AUX1 buttons.
The default is DIRECTV.
Use the r emote contr ol's arrow and SELECT buttons to mak e your choice and follow the on-screen instructions.
Multi-Switch Setup
This f eature allows the satellite system to kno w if you have a multi-switch connected to the system and to determine what type of m ulti-switch is
used.
This feature should only be used in rar e circumstances, such as when instructed to do so b y DIRECTV .
Chapter 4
Languages
This men u allows you to select men u and audio languages. You can choose betw een English and
Spanish for the menu language.
You can choose fr om a variety of audio languages to be heard if a program is simulcast in that
language . If that language is not a vailable f or that br oadcast, the programming will be heard in
its default language.
Output Channel
This f eature allows you to change the TV channel to which the satellite r eceiver br oadcasts its
signal. The default setting is channel 3, which means the TV must be tuned to channel 3 to see
the satellite receiver's picture.
Note: If you used A/V cables to connect your digital satellite receiver to your TV, then you must use the TV's
video line input to see the satellite broadcast.
Picture Size
Selecting Picture Size allows you to select the type of TV connected to the r eceiver. You can
choose between Normal (4X3) or Cinema (16X9). The default is Normal.
Time Zone
Using this feature allows you to set the local time zone and to enact a Da ylight-Sa ving time
option. Accurate time and time zone is necessar y for the Remind f eature. Setting the time zone
is normally automatic, and generally does not r equire you to do an ything.
Setting the time zone should only be done in rar e circumstances, such as if the program times
are wr ong after the system card has been activated.
Note: You must select an entry in the Choose your time zone field before all menu items are displayed.
Using On-Screen Menus
35