Back Of The Digital Satellite Receiver - RCA DRD221RD User Manual

Setup and Connections

Back of the Digital Satellite Receiver

The diagram below describes each of the back panel jacks found on
your digital satellite receiver. When connecting A/V cables, be sure to
connect corresponding OUTPUTS and INPUTS (Video to Video, Right
Audio to Right Audio, etc.).
OUT TO TV Use to
connect the digital
satellite receiver to
your TV. However, if
your TV has audio/
video jacks, you
should use those
jacks to get better
picture and sound
quality.
SATELLITE IN
Use to connect
the digital
satellite
receiver to the
satellite dish
antenna.
AUDIO (R and L) Provide better sound
quality than the OUT TO TV jack. If your TV
has audio/video capability, use these jacks
to connect the digital satellite receiver to
your TV. You must also connect the VIDEO
jack.
6
IN FROM ANT Use to
connect an off-air
satellite dish antenna
or cable TV signal to
the digital satellite
receiver.
IN
OUT
FROM
TO
SATELLITE IN ANT
TV
VIDEO Provides better picture
quality than the OUT TO TV jack. If
your TV has audio/video capability,
use this jack to connect the digital
satellite receiver to your TV. You
must also connect the AUDIO
jacks for sound.
R
PHONE JACK
HOME
VIDEO CONTROL
AUDIO
S-VIDEO
L
S-VIDEO Provides the
best picture quality. If
your TV has S-VIDEO
capability, use this jack
along with the audio/
video jacks to connect
the digital satellite
receiver to your TV.
PHONE JACK Use to
connect the digital
satellite receiver to a
phone line. The receiver
periodically calls out to
program providers.
HOME CONTROL This
jack allows you to
connect the digital
satellite receiver to
accessories, such as the
Home Control base
module.